Inmarsat Beam Active SMA/TNC Cable Kit - 31m/101.7ft (ISD935)

The Inmarsat Beam Active SMA/TNC Cable Kit - 31m/101.7ft (ISD935) is a professional-grade product designed for reliable performance in business-critical and industrial environments. Built to meet commercial standards, it is suitable for daily operational use.

The ISD935 is a high-performance 31-metre (102 feet) antenna cable kit specifically engineered for long-distance satellite communication installations. This kit is ideal for larger marine vessels and extensive fixed installations where the docking station and the active antenna are located far apart. It is designed to maintain signal strength and deliver consistent power over a significant distance without compromising the quality of the Inmarsat GSPS service.

Key Product Features

• Long-Distance Capability: Provides 31 metres of high-grade cabling to support complex installations on large vessels or industrial sites.
• Complete Kit: Includes both a 31m Inmarsat satellite antenna cable and a 31m GPS antenna cable.
• Active Signal Support: Optimized to carry the DC power required to run the internal amplifiers within Beam active antenna models.
• Heavy-Duty Construction: Features a larger cable diameter (10.3mm for satellite) to ensure minimal signal loss over the 102-foot run.
• Pre-Terminated: Factory-fitted with SMA and TNC connectors for a secure, professional, and low-loss connection.

What’s Included

• 1x 31m (101.7ft) Active Inmarsat Satellite Cable (TNC-m to SMA-m)
• 1x 31m (101.7ft) Active GPS Cable (SMA-m to SMA-m)

Installation & Usage

The ISD935 kit is designed for professional deployment where long cable runs are a structural necessity.

• Plan the cable route carefully, keeping in mind the single bend radius of 25.4mm for the satellite cable and 19.1mm for the GPS cable.
• Secure the cables using appropriate marine or industrial fasteners to prevent sagging or tension on the connectors.
• Connect the TNC(m) end to the antenna and the SMA(m) end to the docking station for the satellite link.
• Ensure the GPS cable is correctly seated in the SMA ports at both the antenna and terminal ends.

Usage Tip: Due to the length and thickness of this cable (8.59 lbs total weight), ensure the mounting surface for the docking station and antenna can support the additional weight of the cable run.

Main Specifications

• Satellite Cable Length: 31m / 101.7ft
• GPS Cable Length: 31m / 101.7ft
• Satellite Cable Diameter: 10.3 mm
• GPS Cable Diameter: 6.1 mm
• Kit Weight: 3.9 kg (8.59 lbs)

Technical Specifications

• Premium 50 Ohm RF cable kit designed for active signal amplification, featuring a repeat bend radius of 101.6mm for the satellite cable and 63.5mm for the GPS cable.

Key Capabilities

• Enables satellite connectivity on large-scale maritime platforms and deep-deck installations
• Maintains the necessary voltage to power active antenna heads over a 31m distance
• Supports reliable Inmarsat GSPS voice, data, and emergency services
• Ensures accurate GPS L1 tracking and synchronization for remote operations

Compatibility

The ISD935 cable kit is compatible with the following Beam Inmarsat Antenna models ONLY: ISD710, ISD715, and ISD720.

Compatibility Note: This kit is NOT for use with the ISD700 Passive Antenna.

Ideal Applications

• Large commercial ships, tankers, and luxury yachts
• Multi-story industrial complexes or remote mining facilities
• Fixed-site government and emergency response infrastructure
• Installations requiring antenna placement on high masts or distant rooftops

Product Information

• Product Category: Satellite Antenna Cables
• Manufacturer: Beam Communications
• Model: 31m Active SMA/TNC Cable Kit
• Product Code: ISD935
• Product Type: Active Cable Kit
• Product Status: Genuine manufacturer product